TJ-KB1000L-5000L Large blow molding machine-Blow molding machine-Automatic blow molding machine--Shandong Tongjia Intelligent Equipment Co., Ltd. {official website} green energy-saving hollow plastic blow molding machinery and equipment manufacturer, free sales consultation

Tongjia tj-kb1000l-5000l Series blow molding machine is a blow molding machine developed for 200l-5000l civil barrels, water storage tanks, septic tanks and other large products. The advantage of this series of blow molding machine is that it can process high molecular polyethylene, and its strength is higher than that of similar products on the premise of light weight. This series of blow molding machines can be equipped with 2-5 layers of composite storage die according to the requirements of different products.

Product configuration

Mold opening and closing system: diagonal double pull rod central mold locking two-way synchronous high-precision linear guide rail guided mold opening and closing mechanism

Extrusion system: variable frequency speed regulation + hard tooth surface reducer

Die system: special steel center feed extrusion die

Hydraulic system: fully imported hydraulic valve + hydraulic servo control system

Control system: imported PLC + complete machine control system imported from Europe (Jefferson, Italy)

Note: the above data are for reference only. The company reserves the right to change the components and mechanical structure. The relevant contents involved in the purchase of equipment shall be subject to the contract.

1 Specifications	Units	TJ-KB1000L	TJ-KB1500L	TJ-KB2000L	TJ-KB3000L	TJ-KB5000L
1.1 Material		HDPE	HDPE	HDPE	HDPE	HDPE
1.2 Max.product capacity	L	1000	1500	2000	3000	5000
1.3 Die head layer	Set	1.2.3.4	1.2.3.4	1.2.3.4	1.2.3.4	1.2.3.4
1.4 Machine dimension	M	8.2×6.0×6.0	8.5×7.3×7.2	11.7×8.5×7.5	11.7×8.5×8.0	11.0×8.0×8.0
1.5 Machine weight	Ton	38	48	55	68	85
2 Die-head
2.1 Accumulator capacity	L	30-60	70	60-100	80-140	80-200
2.2 Max. diameter of die	mm	600	600	600	800	820
2.3 Die head heating power	KW	≈54-64	≈80	≈80.8-120	≈129-167	≈129-189
2.4 Die head heating zone quantity	zone	5	5	5-6	5-6	5-6
3 Clamping Unit
3.1 Clamping force	KN	800	1800	1800	2200	3600
3.2 Distance between platens	mm	800-2400	1200-2800	1000-3000	1200-3400	1600-4000
3.3 Mold platen size（W×H）	mm	1500×1600	1600×1900	1800×2200	1800×2600	2200×2800
4 Extruder unit
4.1 Screw diameter	mm	120	135	150	150	135×2
4.2 Screw L/D ratio	L/D	30	32	30	30	32
4.3 HMWHDPE Plasticizing amount	Kg/h	380	400	500	500	400×2
4.4 Screw heating zone quantity	zone	6	6	6	6	6×2
4.5 Screw heating power	KW	36	41	64	64	41×2
4.6 Extruder driving power	KW	132	160	200	200	160×2
5 Power
5.1 Total power consumption	KW	279-301	332	396-436	465-504	600-660
5.2 Hydraulic drive power	KW	45＋7.5	45＋7.5	45＋7.5	65+7.5	37＋24＋7.5
5.3 Cooling water consumption	m³/h	30	40	40	45	50
5.4 Cooling water pressure	Mpa	0.3-0.6	0.3-0.6	0.3-0.6	0.3-0.6	0.3-0.6
5.5 Air pressure	Mpa	1	1	1	1	1
5.6 Air consumption	m³/min	3	3	4	5	5

TJ-KB1000L-5000L Large blow molding machine

Shandong Tongjia Intelligent Equipment Co., Ltd.

online message

在线留言

pay attention to us

关注我们

在线咨询

免费通话

微信扫一扫

站内信息搜索